Fan mount
-
Regular Price
-
19.90€
-
Sale Price
-
19.90€
-
Regular Price
-
Sold Out
-
Unit Price
- per
- Regular Price
- 19.90€
- Sale Price
- 19.90€
- Regular Price
- Unit Price
- per
-
Tool-free
Rotary knobs for tool-free alignment
-
Various dimensions
For 120mm or 140mm fans
-
360° rotation
Rotatable around all 3 axes
-
Suitable for all tents
16/19/22mm
Efficient air circulation solution for the grow tent.
Available for either 120 mm or 140 mm fans.
The air circulator was designed to rotate around all three axes. This allows for easy adjustment to any desired angle inside the grow tent.
Rotary knobs allow for quick assembly as well as easy and flexible adjustments.
In combination with suitable fans, this results in a very efficient air circulation solution with minimal power consumption, high performance and an ultra-low noise level.
The construction is very stable, so ceiling mounting is also easily possible.
The brass threads used ensure high load-bearing capacity and a long service life.
Suitable fan and controller recommendations can be found further down in the Q&A section.
A classic that has proven itself time and time again.
In times when cannabis cultivation was still legally prohibited and long before the market was flooded with "fancy stuff", there were basically only two ways to ensure air circulation.
Either ordinary fans – extremely loud, inefficient, and as bulky as an elephant in a tent. Or PC fans, haphazardly attached with wire, cable ties, tape, or other more or less questionable makeshift solutions.
Then the modern circulating fans from the Far East came onto the market. Initially quite cool – but usually not very durable, often still significantly louder and with unnecessarily high energy consumption.
Many veteran growers, ourselves included, are convinced: For hobbyist tent sizes, there's still hardly anything better than good PC fans. Quiet, extremely efficient, inexpensive, and often with up to a 7-year warranty.
This holder finally allows these fans to be mounted cleanly, stably and without DIY solutions.
Universal holder with clip-on function
Universal holder for all components with our own Quick-Mount system
Made from extremely durable materials
carbon fiber reinforced plastic
The rotary knob is made of ordinary plastic.
ATTENTION: Read safety instructions section 8) Carbon fiber reinforced plastic!
Stable construction
The fan holder is robustly constructed and designed for long-lasting stability. At the same time, its uniform design allows it to blend seamlessly into the rest of the product range. The compact design also ensures a small footprint and a clean, tidy look in the grow tent.
Rotatable by 360 degrees
Thanks to its special design and rotatability on all three axes, virtually any angle in the grow tent can be reached. The fan holder can be flexibly adjusted and is even suitable for upside-down mounting without losing stability or support.
Ceiling mounting possible
Ceiling mounting possible: The fan bracket is designed so that it can be mounted not only on the sides of the tent poles, but also easily on the ceiling of the grow box. This allows the fan to be positioned higher, creating additional space inside the tent and keeping the exhaust system clean and properly aligned.
Frequently asked questions about the fan mount
All standard PC fans with dimensions of 120mm or 140mm fit in the holder.
The Arctic P12 Max/P14 Max or P12 Pro/P14 Pro is definitely the favorite in terms of price/performance, warranty period, and power. Noctua comes in second place due to its high prices.
All roads lead to Rome.
A very affordable, reliable, and extremely space-saving solution is small USB-C PWM controllers . These are either slightly more expensive and readily available from Amazon (PWM Controller Amazon) or – if you're not in a hurry – significantly cheaper from AliExpress (PWM Controller AliExpress).
The quick-mount fits tent poles with a diameter of 16-22mm. You can choose the appropriate clips for the hose.
We are not an electrical goods store and therefore do not accept any liability or warranty claims for electrical components .
As an intermediary, we would merely act as an intermediary, which would make warranty claims unnecessarily complicated and time-consuming.
Individual solutions in a uniform design – Spartahub Grow Edition
Growbox irrigation (configurable)
- Regular Price
- 0.01€
- Sale Price
- 0.01€
- Regular Price
-
- Unit Price
- per
SCROG System (configurable)
- Regular Price
- 28.00€
- Sale Price
- 28.00€
- Regular Price
-
- Unit Price
- per
Fan mount
- Regular Price
- 19.90€
- Sale Price
- 19.90€
- Regular Price
-
- Unit Price
- per
Quick-Connect Magnetic Hose Connectors, 2 pcs.
- Regular Price
- from 19.90€
- Sale Price
- from 19.90€
- Regular Price
-
- Unit Price
- per
Magnetic adapters & hose connectors
- Regular Price
- from 9.90€
- Sale Price
- from 9.90€
- Regular Price
-
- Unit Price
- per
Additional rod holders
- Regular Price
- from 9.90€
- Sale Price
- from 9.90€
- Regular Price
-
- Unit Price
- per
LST clips for Autopot, 12 pieces.
- Regular Price
- 12.99€
- Sale Price
- 12.99€
- Regular Price
-
- Unit Price
- per
Adlite holder for Mars Hydro (2 pieces)
- Regular Price
- from 18.90€
- Sale Price
- from 18.90€
- Regular Price
-
- Unit Price
- per
Modular exhaust housing including 2x flanges
- Regular Price
- from 56.90€
- Sale Price
- from 56.90€
- Regular Price
-
- Unit Price
- per
Exhaust hose wall bracket 1 pc.
- Regular Price
- 8.90€
- Sale Price
- 8.90€
- Regular Price
-
- Unit Price
- per
Growbox Spacebooster 4 pcs.
- Regular Price
- 19.90€
- Sale Price
- 19.90€
- Regular Price
-
- Unit Price
- per
Sensor holder
- Regular Price
- from 12.90€
- Sale Price
- from 12.90€
- Regular Price
-
- Unit Price
- per
Rope winder / cord winder
- Regular Price
- from 7.90€
- Sale Price
- from 7.90€
- Regular Price
-
- Unit Price
- per
Pipette holder for pH+/- fertilizer including pipettes
- Regular Price
- from 21.90€
- Sale Price
- from 21.90€
- Regular Price
-
- Unit Price
- per
Fan mounts Spider Farmer Mars Hydro & other manufacturers
- Regular Price
- 14.90€
- Sale Price
- 14.90€
- Regular Price
-
- Unit Price
- per
Fan bracket exhaust air mounting plate
- Regular Price
- 19.90€
- Sale Price
- 19.90€
- Regular Price
-
- Unit Price
- per
Magnetic light trap with activated carbon filter
- Regular Price
- from 29.90€
- Sale Price
- from 29.90€
- Regular Price
-
- Unit Price
- per
Cable clips for grow boxes, 12 pieces.
- Regular Price
- 11.90€
- Sale Price
- 11.90€
- Regular Price
-
- Unit Price
- per
Hygrometer with holder for glasses
- Regular Price
- from 8.90€
- Sale Price
- from 8.90€
- Regular Price
-
- Unit Price
- per
Yellow sticky trap holder flycatcher
- Regular Price
- 9.90€
- Sale Price
- 9.90€
- Regular Price
-
- Unit Price
- per
Fresh air/exhaust air filter flange
- Regular Price
- from 18.90€
- Sale Price
- from 18.90€
- Regular Price
-
- Unit Price
- per
Drain table with drain
- Regular Price
- from 17.90€
- Sale Price
- from 17.90€
- Regular Price
-
- Unit Price
- per
Cup holder plant pot
- Regular Price
- 13.90€
- Sale Price
- 13.90€
- Regular Price
-
- Unit Price
- per
Controller Holder Mars Hydro Spider Farmer and Co.
- Regular Price
- from 12.90€
- Sale Price
- from 12.90€
- Regular Price
-
- Unit Price
- per
Hanger hooks clips 2x
- Regular Price
- 7.90€
- Sale Price
- 7.90€
- Regular Price
-
- Unit Price
- per
Activated carbon filter holder
- Regular Price
- 19.00€
- Sale Price
- 19.00€
- Regular Price
-
- Unit Price
- per
Camera mounts from Tapo, TP-Link and similar brands
- Regular Price
- 13.90€
- Sale Price
- 13.90€
- Regular Price
-
- Unit Price
- per
AC Infinity AI Controller Magnetic Holder
- Regular Price
- 19.90€
- Sale Price
- 19.90€
- Regular Price
-
- Unit Price
- per